Welcome Guest! To enable all features please login.



Mike 88
#1 Posted : 31 July 2018 20:57:04(UTC)
Mike 88

Rank: Regular poster

Groups: OCMember, Registered
Joined: 24/10/2017(UTC)
Posts: 32

Thanks: 2 times
Was thanked: 2 time(s) in 2 post(s)

Hi guys, we do occasional track days sprints recently Rockingham. Car is fun to drive but find myself wedging myself in with elbows and knees. Would like to fit a bucket seat that can be used only for track days so needs to be easily removed.what size seat for NC can this be fitted to standard rails so in and out on 4? Bolts. If I do this is there an easy way to fit a harnes. Loads seen in NA and B has anyone fitted them in NC. Will only do drivers probably 



#2 Posted : 02 August 2018 10:56:29(UTC)

Rank: Advanced poster

Groups: Registered
Joined: 09/01/2015(UTC)
Posts: 144

Thanks: 19 times
Was thanked: 13 time(s) in 13 post(s)

Do you do facebook?  There is a guy on one of the MX5 NC groups (Adam James Taylor I think) who has made a bracket that bolts onto the 4 bolt holes and gives a flat steel surface.  they are quite wide so you can then bolt in anything you want using generic runners that come with the seat, I guess side mounts would sit lowest if you need that.  He sells them for £100 each.  I suspect that would be your easiest option.

Which seats fit I couldn't tell you but I know space is quite tight so you need to choose carefully!  Its been discussed on the MX5 facebook page a few times...

Users browsing this topic
Guest (2)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2019, Yet Another Forum.NET
This page was generated in 0.137 seconds.